For many homeowners, the perfect bathroom is one designed as a serene, hassle-free sanctuary that remains impeccably tidy. However, cluttered countertops often obstruct this ambiance; they emit disarray and complicate efforts to maintain cleanliness near the basin.
best strategy for decluttering
, however, doesn’t simply involve tossing your toiletries into the closest drawer or cabinet. Instead, what matters is finding an effective organization system for keeping those spaces tidy so you can effortlessly locate your daily necessities without them cluttering your countertop. Starting with constructing some storage drawers designed specifically for fitting under-the-sink cabinets could be highly beneficial. Although this task may seem daunting at first glance, it’s quite manageable. Moreover, it won’t break the bank as many materials needed can typically be found affordably at stores like The Dollar Tree.
You can construct the cabinet frame for your under-the-sink drawer unit using five parts.
Readi-Board White Foam Boards
, a roll of
Contact Adhesive Shelf Liner with Grey Floral Pattern
, along with some hot glue. You’ll need to create several horizontal slots on the inner side of the foam frame for paint stirring sticks, acting as drawer guides. For making the drawers, simply spraypaint four pieces.
Greenbrier Kennel Club Cat litter Trays
The finished project assists you
tidy up bathroom countertops but keep essentials within reach
It might serve as a solid beginning toward
expanding the appearance of your compact bathroom
as well.
Read more:
The 12 Budget-Friendly Tree Products That Will Help You Set Up the Perfect Vanity Organization
How to Create Your Own StorageDrawer Unit for Your Bathroom Cabinets
Firstly, measure the interior dimensions of your under-sink cabinet to figure out how many drawers can be accommodated inside. After determining this, proceed with cutting your foam board accordingly. If designing a setup with four drawers, you’ll require four pieces measuring 18 by 16 1/2 inches each, four more at 14 by 6 inches, and an additional seven pieces sized at 2 by 14 inches. These sizes should scale proportionately based on the total number of drawers planned for your design. Next, apply spray paint to both your plant trays and stirrer sticks ensuring all parts share uniform coloration. Finally, adhere together the largest four foam sections to construct two sturdy vertical supports forming part of the framework’s sides.
Firstly, adhere contact paper to one side of each of your six biggest foam sheets. Next, utilize one tray as a template to indicate where the paint stick sliders should be placed on the interior surface of the side panels. Employ either a pen or a craft knife to carve slots into the foam at these marked points before securing the paint sticks with hot glue. Following this step, assemble the framework; position two of the medium-sized foam sections across the upper part of the sides for stability, and install the remaining pair similarly below them. Insert the containers next, then secure small foam blocks vertically along the rear area to prevent the compartments from moving backward. For added durability, consider substituting wooden boards for the foam elements and switching out the hot glue for wood adhesive throughout construction.
Liked this article? Receive professional home tips, do-it-yourself tutorials, and design ideas by subscribing to the service.
House Digest newsletter
!
Read the
Original Article from House Digest
.
